General Specification Designer : Gordon Harris Builder : Pegasus Yachts, Oulton Broad LOA : 7.85m (25ft 9in) LWL : 6.4m (21ft 0in) Beam : 2.67m (8ft 9in) Draft : 1m (3ft 3in) Displacement : 2,000kg Ballast : 860kg Keel : Centreboard Construction GRP construction Original gelcoat finish throughout Lifting keel New keel bolts 2005 Non slip decks Self draining cockpit Anchor locker Wintered ashore annually No known signs of osmosis 2021 Pre-Purchase Inspection Report. Available to view below Rigging & Sails Fractional Bermudan Sloop rig Alloy mast/spar... read more

General Specification Designer: Linton Hope (1900) Builder: Kingsley Farrington LOA: 7.38m (24ft 3in) LWL: 5.03m (16ft 6in) Beam: 1.55m (5ft 1in) Draft min: 0.91m (3ft 0in) Keel: Long Construction GRP construction Original black gelcoat finish and antifouling Painted decks (non-slip) Wintered ashore annually Mechanical & Electrical No engine Rigging & Sails Gaff rig Sail area : 24.3 sq.m (262 sq.ft.) Wooden mast & spars (Spars re-varnished 2021) Stainless steel standing rigging Polyester running rigging Mast stepped in wooden tabernacle... read more

General Specification Designer :JW& A Upham Builder :Upham's of Brixham LOA :7.52m (24ft 8in) LWL:6.63m (21ft 9in) Beam :2.57m (8ft 5in) Draft min:1.42m (4ft 8in) Maximum headroom:1.83m ( 6ft 0in) Keel :Deep Keel Construction Wooden carvel construction Painted finish Timber sheathed and painted decks Self draining cockpit Wintered ashore annually Mechanical & Electrical Bukh DV10 – 10hp diesel engine (last serviced 2024) Full engine service 2024 including new cylinder head gasket, fuel injector service, exhaust elbow, fuel and oil filters. Pl... read more

General Specification Designer :Neil Hunt Builder :Easticks, Acle LOA :10.06m (33ft 0in) LOD :8.53m (28ft 0in) Beam :2.59m (8ft 6in) Draft min:1.21m (4ft 0in) Keel :Fin Construction Composite construction GRP hull in original gelcoat finish GRP decks Wood superstructure Cockpit bulkhead refaced and varnished 2022 Full lifting cabin roof Hull cleaned & antifouled 2023 Mechanical & Electrical Volvo Penta 9hp diesel inboard single cylinder engine Last serviced 2023 20L plastic fuel tank Single lever control 2 x 12V batteries (1 starter & 1 leisure ... read more

General Specification Designer : Van de Stadt Builder : Tyler Boat Company (Tonbridge, Kent) LOA :12.8m (42ft 0in) LWL:9.14m (30ft 0in) Beam :3.35m (11ft 0in) Draft min:2.13m (7ft 0in) Displacement :11000kg Keel :Long Fin Construction GRP hull (epoxied) & superstructure Cast iron moulded in keel Hull constructed circa 1970 by Tyler, Tonbridge Fitting out completed 1990 Solid GRP decks with non-slip side decks & cabin top Self-draining cockpit Square transom with self-steering gear fitted Antifouled March 2024 (Red) Last surveyed February 2024 (copy att... read more

General Specification Builder :C B Darby, Oulton Broad LOA :9.75m (32ft 0in) Beam :3.51m (11ft 6in) Air Draft:2.03m (6ft 8in) Construction Wood carvel construction Epoxied finish to gunwales Varnish finish to superstructure Centre cockpit Folding wheelhouse with canvas canopy over (good condition) plus 2 x side panels that fold outwards to open entire cockpit Open aft cockpit Air draft with wheelhouse lowered/screens removed: 2m (6.8ft) approximately (will not fit under old Potter Heigham bridge) Currently ashore (tent covered) and will remain so until sold Mechanical... read more

General Specification Designer :G.I.P Boats, Stanton, Suffolk Builder :G.I.P Boats, Stanton, Suffolk LOA :4.6m (15ft 1in) Beam :1.7m (5ft 7in) Construction GRP Construction Original gelcoat finish throughout (new clear topcoat 2024) White hull with grey topsides Cathedral style Hull Small cuddy cabin Built 1980’s (Exact year unknown) New window seals Mechanical & Electrical 50hp Mariner 50hp 3-cyl 2-stroke petrol engine with approximately 35 hours (newly serviced April 2024 including new water pump & gear lube, in good condition) Electric start O... read more

General Specification Designer :Graham Bunn Builder :Bunns of Wroxham LOA :13.72m (45ft 0in) LWL:11.73m (38ft 6in) Beam :3.32m (10ft 11in) Draft min:1.07m (3ft 6in) Draft max:1.45m (4ft 9in) Air Draft:1.83m (6ft 0in) Keel :Drop Construction Wood carvel construction Redwood pine planking on steamed oak timbers White gloss paint finish with red antifouling Mahogany cabin sides, cockpit benches, internal panelled bulkheads, bunks, lockers and tables (all original) Fixed cabin roof Hinged drop keel operated from a bulkhead tackle in the aft cabin. The plate drops through th... read more

General Specification Designer : Johan Anker (1929, Norway) Builder : Børresens Bådebyggeri, Vjile, Denmark LOA : 8.9m (29ft 2in) Beam : 1.95m (6ft 5in) Draft : 1.2m (3ft 11in) Displacement : 1,700kg Keel : Long Construction Wood carvel construction Mahogany on oak frames Varnish topsides with black antifouling A full and meticulous restoration job undertaken in 2023 She now looks incredible with gleaming varnished topsides, fared hull and fully repainted interior as well as being in excellent structural shape! Completed works include: New ring frames and ... read more

General Specification Designer: Dennis Rayner Builder: Westerly Marine Construction Ltd. (UK) LOA: 6.78m (22ft 3in) LOD: 6.78m (22ft 3in) LWL: 5.59m (18ft 4in) Beam: 2.26m (7ft 5in) Draft max: 0.69m (2ft 3in) Maximum headroom: 1.80m ( 5ft 11in) Displacement: 1432kg Keel: Bilge/Twin Construction GRP hull and superstructure Original gelcoat finish to hull Topsides professionally painted with two pack (2020) Painted non-slip decks Stainless steel keel bolts Self Draining cockpit Anchor locker Storage locker Last surveyed August 2020 Maintenance history bills can be s... read more